一般來說,氣液增壓缸出現無法正常增壓的情況,不一定就意味著氣液增壓缸壞了。那么,什么原因會(huì )導致氣液增壓缸不增壓,遇到這種情況,又該如何解決呢。
Generally speaking, the failure of gas-liquid booster cylinder to pressurize normally does not necessarily mean that the gas-liquid booster cylinder is broken. Then, what causes the non pressurization of the gas-liquid booster cylinder? In this case, how to solve it.
氣液增壓缸不增壓的原因及對應解決方法:
Reasons for non pressurization of gas-liquid booster cylinder and corresponding solutions:
1、閥組未調式好。檢查閥組是否未調式好,如是則重新調試閥組。
1. The valve block is not well adjusted. Check whether the valve group is not well adjusted. If so, re commission the valve group.
2、調壓閥已損壞,導致氣源不能進入。檢查調壓閥是否損壞,如是則需更換調壓閥
2. The pressure regulating valve has been damaged, so that the air source cannot enter. If yes, check whether the pressure regulating valve is damaged
3、對于接有調壓閥或缸體接頭為調速接頭的氣液增壓缸,調整接頭已處于關閥狀態。檢查調整接頭是否已處于關閥狀態,如是則重新打開速調接頭
3. For the gas-liquid booster cylinder connected with the pressure regulating valve or the cylinder body joint is the speed regulating joint, the regulating joint has been closed. Check whether the adjusting connector is closed. If so, reopen the quick adjusting connector
The above is the knowledge brought to you today. The gas-liquid booster pump has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://m.liqun518.com