氣液增壓泵被應用于很多的行業，幫助眾多企業解決了產能低下的問題。可是，在使用的過程，有時候會(huì )出現一些故障問題，很多人都不會(huì )處理，今天小編就來聊一聊氣液增壓泵的常見故障及其解決方案。
Gas liquid booster pumps are used in many industries, helping many enterprises solve the problem of low production capacity. However, in the process of use, some failures sometimes occur, which many people can't handle. Today, I will talk about the common failures and solutions of the gas-liquid booster pump.
一、氣液增壓泵動作緩慢
1、 The gas-liquid booster pump acts slowly
檢查氣液增壓泵的驅動氣路是否受阻。
Check whether the driving air circuit of the gas-liquid booster pump is blocked.
檢查氣液增壓泵的控制氣路是否受阻。
Check whether the control air circuit of the gas-liquid booster pump is blocked.
檢查氣液增壓泵驅動活塞的密封件是否漏氣、磨損、老化。
Check whether the sealing elements of the driving piston of the gas-liquid booster pump are leaking, worn and aged.
二、氣液增壓泵不保壓
2、 The gas-liquid booster pump does not maintain pressure
檢查出口單向閥的密封件是否損壞。
Check whether the seal of the outlet check valve is damaged.
三、氣液增壓泵不工作
3、 The gas-liquid booster pump does not work
檢查驅動氣源(工作氣源)是否開啟，驅動壓力是否滿足氣液增壓泵要求。
Check whether the driving air source (working air source) is open and whether the driving pressure meets the requirements of the gas-liquid booster pump.
檢查氣液增壓泵氣路是否暢通，連接是否正確。
Check whether the air circuit of the gas-liquid booster pump is smooth and whether the connection is correct.
檢查換向閥氣路是否暢通。
Check whether the air circuit of the reversing valve is smooth.
四、達到設定壓力或保壓一段時間后，氣液增壓泵不停
4、 When the set pressure is reached or maintained for a period of time, the gas-liquid booster pump will not stop
檢查氣液增壓泵控制氣路是否泄漏，主要檢查換向閥閥芯的密封。
Check whether the control air circuit of the gas-liquid booster pump leaks, mainly check the sealing of the reversing valve spool.
檢查氣液增壓泵出口單向閥的密封是否損壞、磨損、老化。
Check whether the seal of the one-way valve at the outlet of the gas-liquid booster pump is damaged, worn and aged.
檢查高壓液密封件是否受損。
Check the high-pressure fluid seals for damage.
五、氣液增壓泵不上壓
5、 The gas-liquid booster pump is not pressurized
進口單向閥密封泄漏。
The seal of the inlet check valve is leaking.
高壓密封件受損，此種情況液體將從消音器中噴出。
The high-pressure seal is damaged, in which case the liquid will spray out of the muffler.
六、氣液增壓泵動作突然加快，驅動活塞不到頭就換向
6、 The action of the gas-liquid booster pump suddenly accelerates, and the driving piston reverses before it reaches the end
檢查換向閥端的撞針孔是否變成了常通孔。
Check whether the impact pin hole at the reversing valve end has become a normal hole.
檢查換向閥高壓腔是否漏氣。
Check whether the high-pressure chamber of the reversing valve leaks.
檢查控制氣管有無破裂。
Check whether the control air pipe is broken.
以上就是氣液增壓泵的常見故障及其解決方案的相關介紹，希望對你有所幫助。更多相關內容就來我們網站
http://m.liqun518.com進行咨詢了解吧！
The above is the introduction of the common faults and solutions of the gas-liquid booster pump, and I hope it will be helpful to you. More relevant content will come to our website http://m.liqun518.com Consult and understand!
