隨著科技技術的不斷進步，工業生產自動化越來越常見，氣液增壓泵作為自動化生產常見的一個氣動配件，在很多行業中隨處可見。在使用氣液增壓泵的時候，有些人會(huì )碰到氣液增壓泵沒壓力的情況。這到底是怎么回事呢?下面小編就帶大家來了解一下引發
氣液增壓泵沒壓力的原因有哪些？
With the continuous progress of science and technology, industrial production automation is more and more common. As a common pneumatic accessory in automatic production, gas-liquid booster pump can be seen everywhere in many industries. When using the gas-liquid booster pump, some people will encounter the situation that the gas-liquid booster pump has no pressure. What the hell is going on? Now, what are the causes of no pressure in the gas-liquid booster pump?
1、氣源壓力供給是否正常。如氣源壓力不正常的話，將氣源壓力穩定在標準值。
1. Whether the air supply pressure supply is normal. If the air supply pressure is abnormal, stabilize the air supply pressure to the standard value.
2、油壓表是否損壞。壞的油壓表不能正常顯示壓力，造成了沒有壓力的假象，如是壞了的油壓表將油壓表更換。
2. Check whether the oil pressure gauge is damaged. The broken oil pressure gauge can not display the pressure normally, causing the illusion that there is no pressure. If it is broken, replace the oil pressure gauge.
3、油壓表接頭看看有沒有生料帶堵住。檢查油壓表過油孔是否被污漬堵住。
3. Check whether the joint of the oil pressure gauge is blocked by the raw material belt. Check whether the oil hole of the oil pressure gauge is blocked by dirt.
4、調壓閥是否損壞及調速接頭是不是出于沒打開狀態。如是調壓閥壞了，更換調壓閥;將調速接頭正常打開看看。
4. Whether the pressure regulating valve is damaged and whether the speed governing connector is not opened. If the pressure regulating valve is broken, replace it; Open the speed governing connector normally.
5、液壓油不足。檢查氣液增壓泵液壓油油量，如液壓油不足的話，添加液壓油油筒二條標簽線中即可。
5. Insufficient hydraulic oil. Check the hydraulic oil volume of the gas-liquid booster pump. If the hydraulic oil is insufficient, add hydraulic oil to the two label lines of the oil cylinder.
此外當增壓泵突然停止工作時，應檢查控制電壓信號，如果信號正常，關斷氣源，確保泵內無壓縮空氣時，擰開右端蓋上的限位閥螺帽，取出限位閥閥桿，檢查密封圈是否離開溝槽，如果離開，把它推回溝槽，重新安裝好螺帽，接通氣源；
In addition, when the booster pump suddenly stops working, first check the control voltage signal. If the signal is normal, turn off the air source to ensure that there is no compressed air in the pump. Unscrew the limit valve nut on the right end cover, take out the limit valve stem, and check whether the seal ring leaves the groove. If it does, push it back to the groove, reinstall the nut, and connect the air source;
泵如果仍不動作，再關斷氣源，確保泵內無壓縮空氣時，更換電磁換向閥，接通氣源；如增壓泵仍不工作，請聯系我們或就近代理或供應商。
If the pump still does not work, turn off the air source again. If there is no compressed air in the pump, replace the solenoid directional valve and connect the air source; If the booster pump still does not work, please contact us or the nearest agent or supplier.
當增壓泵輸出壓力下降或達不到設定壓力時，請檢查管線是否有泄露，如無泄露現象，請檢查氣源壓力是否正常，如一切均正常則考慮更換密封件。
When the output pressure of booster pump drops or fails to reach the set pressure, please check whether the pipeline leaks. If there is no leakage, please check whether the air source pressure is normal. If everything is normal, consider replacing the seals.
The reason why the gas-liquid booster pump has no pressure is explained here. If you have any questions about this, please come to our website http://m.liqun518.com Get to know!
