雙驅動氣體增壓泵氣體增壓泵是為滿足用戶對氣體壓力的更高要求，在HGD、HGT系列氣體增壓泵的基礎上，增加一級驅動活塞，兩級驅動活塞疊加，使用原有增壓比放大一倍，大壓力可達160MPa。
The dual drive gas booster pump gas booster pump is designed to meet the higher requirements of users for gas pressure. On the basis of the HGD and HGT series gas booster pumps, a two-stage driving piston is added, and the two-stage driving piston is superimposed. The original boost ratio is doubled, and the high pressure can reach 160MPa.
hipressure氣體增壓泵的特點:
Characteristics of high-pressure gas booster pump:
到達預定壓力后即自動停機，不再消耗多余的能量和產生熱量
Upon reaching the predetermined pressure, the machine automatically shuts down without consuming excess energy or generating heat
以壓縮空氣為動力源，不需使用電源
Using compressed air as the power source, no power supply required
不產生熱量，不會(huì )有火花和火焰危險，防爆
No heat generation, no spark or flame hazard, safe and explosion-proof
線性輸出，易于實現人工或自動控制-通過控制驅動氣壓或入口氣體壓力可以精確調節輸出壓力
Linear output, easy to achieve manual or automatic control - precise adjustment of output pressure can be achieved by controlling the driving air pressure or inlet gas pressure
達160bar(160MPa)的高輸出壓力，滿足大多數高壓需要
High output pressure of up to 160bar (160MPa), meeting most high-pressure needs
可以連續起停，不受限制，并無不良影響
Can start and stop continuously without restrictions and without adverse effects
氣動活塞環及其他氣動部件在工作狀態時不需要添加潤滑油，從而節省運行成本，并可防止油氣污染環境
Pneumatic piston rings and other pneumatic components do not require the addition of lubricating oil during operation, thereby saving operating costs and preventing oil and gas pollution of the environment
輕便可靠，易于維護，堅固耐用
Lightweight and reliable, easy to maintain, sturdy and durable
hipressure氣體增壓泵的應用范圍:
The application range of high-pressure gas booster pumps:
閥門、管件、壓力容器等提供氣壓靜壓和高壓爆破測試
Provide pneumatic static pressure and high-pressure burst testing for valves, fittings, pressure vessels, etc
航空航天高壓附件維修后的氣壓靜壓、動態測試
Aerostatic pressure and dynamic testing of high-pressure accessories in aerospace after maintenance
閥校定
Safety valve calibration
閥門及井口裝置水中冒泡試驗
Valve and wellhead equipment water bubbling test
氣體調壓閥的高氣壓檢測
High pressure detection of gas pressure regulating valve
汽車制動系統及管路測試
Automotive brake system and pipeline testing
通信電纜充氣測試
Communication cable inflation test
飛機輪胎和蓄能器充氣的高壓氮氣增壓系統
High pressure nitrogen pressurization system for inflating aircraft tires and accumulators
氣體輔助注塑中高壓氮氣增壓系統
High pressure nitrogen pressurization system in gas assisted injection molding
超純凈氣體增壓（如CO2超臨界萃取）
Supercharging of ultrapure gases (such as CO2 supercritical extraction)
稀有昂貴氣體增壓回收（如氦氣回收等）
Rare and expensive gas pressurized recovery (such as helium recovery)
呼吸氣輸送與充氣
Breathing gas delivery and inflation
蓄能器充氮
Accumulator nitrogen charging
