空氣增壓泵是以壓縮空氣為動力源的一種活塞增壓閥。主要適用于需要高壓氣體的場合，給未達到標準氣壓的氣體增加壓力，可將普通氣源壓力提升幾十上百倍。那么空氣增壓泵不同時工作什么原因呢？下面氣體增壓泵廠家為您講解一番。

Air booster pump is a piston booster valve with compressed air as power source. It is mainly applicable to the occasions where high-pressure gas is required. It can increase the pressure of the gas that does not reach the standard pressure, and can increase the pressure of the common gas source by tens or hundreds of times. So what is the reason why the air booster pump does not work at the same time? The gas booster pump manufacturer will explain it to you.

1、當進氣源進入增壓閥時氣控閥芯往復切換工作，使增壓閥快速往復工作，提升氣體壓力，以達到所需或設置壓力值，隨著壓力的提高，活塞往復頻率越來越慢，當達到所需壓力值是增壓閥自動停止工作，此時將不再消耗氣源。當氣體壓力因使用所降低少于所需值時，增壓閥將自動啟動，將壓力值增加到所需之后自動停止。所以增壓閥屬于自動工作，操作簡單。

1. When the inlet air enters the pressurization valve, the pneumatic control valve core switches back and forth to make the pressurization valve work quickly and back to raise the gas pressure to reach the required or set pressure value. With the increase of the pressure, the reciprocating frequency of the piston becomes slower and slower. When the required pressure value is reached, the pressurization valve automatically stops working, and the air source will no longer be consumed. When the gas pressure decreases less than the required value due to use, the booster valve will start automatically and stop automatically after the pressure value is increased to the required value. Therefore, the booster valve is automatic and easy to operate.

2、主要適用于閥門、管件、壓力容器、儀器儀表等耐壓和爆破測試場合。

2. It is mainly applicable to pressure and explosion test occasions such as valves, pipe fittings, pressure vessels, instruments and meters.

造成增壓泵不能正常工作的原因包括：

The reasons for the booster pump not working normally include:

1、驅動活塞密封件遭到磨損而導致活塞上側和下側出現串氣現象；

1. The seal of the driving piston is worn, resulting in cross-talk between the upper and lower sides of the piston;

2、換向閥不干凈會(huì )或是因密封件損壞而導致其無法正常運動；

2. If the reversing valve is not clean, or the seal is damaged, it will not move normally;

3、兩活塞連接處遭到損壞，開口銷脫落，兩活塞桿出現錯位現象而導致活塞桿不能移動；

3. The connecting part of the two pistons is damaged, the cotter pin falls off, and the two piston rods are misaligned, resulting in the piston rod cannot move;

4、增壓缸密封件出現漏氣現象等。

4. Air leakage occurs in the seal of booster cylinder.

此外空氣增壓泵工作原理類似于壓力增壓器，對大徑空氣驅動活塞施加一個很低的壓力，當此壓力作用于一個小面積活塞上時，產生一個高壓。通過一個二位五通氣控換向閥，增壓泵能夠實現連續運行。更多相關內容就來我們網站http://m.liqun518.com咨詢了解吧。

In addition, the working principle of the air booster pump is similar to that of the pressure booster, which applies a very low pressure to the large-diameter air driven piston. When this pressure acts on a small area piston, a high pressure will be generated. Through a two position five ventilation control reversing valve, the booster pump can realize continuous operation. For more information, please visit our website http://m.liqun518.com Consult and understand.