氣體增壓泵顧名思義是增壓氣體的增壓泵，其原理是利用低壓氣體推動大活塞來帶動高壓增壓缸的小活塞，通過大小活塞的面積比來得到氣體增壓泵的增壓比。為什么說
氣體增壓泵的使用對多個方面有要求呢？
As the name implies, the gas booster pump is a booster pump of pressurized gas. Its principle is to use the low-pressure gas to push the large piston to drive the small piston of the high-pressure booster cylinder, and obtain the booster ratio of the gas booster pump through the area ratio of the large and small pistons. Why is the use of gas booster pump required in many aspects?
1.使用方要準備好被增壓氣體和管路，驅動氣體和管路，高壓氣體的出口管路，按增壓泵出廠時所帶的說明書先固定增壓泵，按照增壓泵的各個進出口接頭尺寸，連接好管路，檢查是否耐壓足夠，接頭是否有泄露等，檢查完好后就可以進行增壓測試了。
1. The user shall prepare the pressurized gas and pipeline, the driving gas and pipeline, and the outlet pipeline of high-pressure gas. Fix the booster pump according to the instructions provided by the booster pump when it leaves the factory. Connect the pipeline according to the size of each inlet and outlet connector of the booster pump. Check whether the pressure resistance is sufficient and whether the connector is leaking. After the inspection is complete, the booster test can be carried out.
2.氣源方面：氣體增壓泵的驅動氣源一般是在1.8-8bar壓力范圍，不建議它的驅動氣源超過10bar，如果驅動氣源過高，那么很大程度上會(huì )對泵體造成損傷，更有甚者會(huì )對操作人員造成人員傷亡
2. Air source: the driving air source of the gas booster pump is generally in the pressure range of 1.8-8bar. It is not recommended that its driving air source exceed 10bar. If the driving air source is too high, it will damage the pump body to a large extent, and even cause casualties to the operators
3.氣體增壓泵選型方面：客戶要根據自身的壓力選擇對應的增壓比，按照客戶自己的壓力需求，突出氣源壓力、進氣壓力、輸出壓力需求、流量是多少，銷售工程師才能更準確的幫您選型
3. Selection of gas booster pump: customers should select the corresponding boosting ratio according to their own pressure. According to their own pressure demand, focus on the gas source pressure, intake pressure, output pressure demand and flow. Only then can the sales engineer help you select the type more accurately
4.對現場使用環境方面：現場使用環境一定要干凈，不能有太大的粉塵顆粒狀，驅動氣源及被增壓介質水分不要含量太多，這樣會(huì )大大降低泵的使用的壽命；
4. For the on-site use environment: the on-site use environment must be clean without too much dust particles. The water content of the driving air source and the pressurized medium should not be too much, which will greatly reduce the service life of the pump;
5.對管路的要求：客戶現場使用的時候一定要檢測高壓輸出管道的密封嚴實型，采用的管道、閥門、壓力表一定要大于氣體增壓泵輸出的額定壓力。大限度的保證人員的操作；
5. Requirements for pipeline: when the customer uses the pipeline on site, the tightness of the high-pressure output pipeline must be tested. The pipeline, valve and pressure gauge used must be greater than the rated pressure output by the gas booster pump. Ensure the operation safety of personnel to a large extent;
6.對壓力容器的要求：各部分承壓件，特別是壓力容器，一定要具有壓力容器廠家生產的壓壓力容器檢查報告。
6. Requirements for pressure vessels: all pressure containing parts, especially pressure vessels, must have the inspection report of pressure safety vessels produced by the pressure safety vessel manufacturer.
此外氣體增壓泵適合的場合普遍如氣彈簧沖氮氣，工業用氧氣激光切割，反應釜二氧化碳超臨界等所有用到無腐蝕性氣體增壓的領域都可以使用。更多相關內容就來我們網站
http://m.liqun518.com咨詢了解吧！
In addition, the gas booster pump is suitable for a wide range of applications, such as gas spring charging nitrogen, industrial oxygen laser cutting, reaction vessel carbon dioxide supercritical and so on. It can be used in all fields where non corrosive gas pressurization is used. For more information, please visit our website http://m.liqun518.com Consult and understand!
