氣體增壓泵是以壓縮空氣為動力源的一種活塞式增壓泵，當進氣時增壓氣控閥的閥芯往復切換工作，控制增壓泵活塞以極快的速度作往復動作，隨著輸出壓力的增高，活塞的往復速度減慢直停止，此時，增壓泵輸出的壓力恒定，能量消耗，各部件停止工作；無論何種原因造成保壓回路壓力下降，增壓泵將自動啟動，補充泄露壓力，保持回路壓力恒定。泵體全部采用鋁合金及不銹鋼制造，密封件均為進口品，驅動氣壓為8bar。
A gas booster pump is a piston type booster pump that uses compressed air as the power source. When the air is intake, the valve core of the booster gas control valve switches back and forth, controlling the booster pump piston to reciprocate at an extremely fast speed. As the output pressure increases, the reciprocating speed of the piston slows down until it stops. At this time, the output pressure of the booster pump is constant, the energy consumption is the lowest, and all components stop working; Regardless of the cause of the pressure drop in the pressure maintaining circuit, the booster pump will automatically start to supplement the leakage pressure and maintain a constant circuit pressure. The pump body is all made of aluminum alloy and stainless steel, with imported seals and a driving pressure of 8 bar.
1、維護簡單：增壓泵的零件及密封少，維護簡單且成本低著一起復增壓。
1. Easy maintenance: The booster pump has fewer parts and seals, making it easy to maintain and cost-effective for re pressurization.
2、性?xún)r(jià)比高：增壓泵具有輸出性能高而成本低的特性。
2. High cost-effectiveness: Booster pumps have the characteristic of high output performance and low cost.
3、可調性強：增壓泵輸出壓力和流量都由驅動氣體的壓力調節閥準確地調節。調節驅動氣壓，使氣壓管道增壓泵的輸出壓力在預增氣壓和輸出壓力之間精確調整。
3. Strong adjustability: The output pressure and flow rate of the booster pump are accurately adjusted by the pressure regulating valve that drives the gas. Adjust the driving air pressure to accurately adjust the output pressure of the pneumatic pipeline booster pump between the pre increased air pressure and the maximum output pressure.
4、輸出壓力高：氣動液體管道增壓泵的工作壓力可達到，氣動氣體管道增壓泵的工作壓力可達到。
4. High output pressure: The maximum working pressure of the pneumatic liquid pipeline booster pump can be reached, while the maximum working pressure of the pneumatic gas pipeline booster pump can be reached.
5、材質：增壓泵高壓部分材質為硬質鋁合金。高壓柱塞材質為不銹鋼。并采用雙層密封。關鍵部位材質可以根據介質性制選配。
5. Excellent material: The high-pressure part of the booster pump is made of hard aluminum alloy. The high-pressure plunger material is stainless steel. And adopt double layer sealing. The materials of key parts can be selected according to the medium properties.
